Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Catalytic,Asymmetric Synthesis of Phosphonic γ‐(Hydroxyalkyl)butenolides with Contiguous Quaternary and Tertiary Stereogenic Centers

A procedure that enables high yielding access to phosphonic γ‐(hydroxyalkyl)butenolides with excellent regio‐, diastereo‐ and enantiocontrol is reported. The simultaneous construction of up to two adjacent quaternary stereogenic centers by a catalytic asymmetric vinylogous Mukaiyama aldol reaction unites biologically and medicinally relevant entities, namely α‐hydroxy phosphonates and γ‐(hydroxyalkyl)butenolides. This is achieved by utilizing a readily available chiral copper‐sulfoximine catalyst showing a broad functional group tolerance for both the electrophilic and nucleophilic reactants. A discussion about potential factors affecting the observed level of enantioselectivity, which stems from the enantiopure sulfoximine ligand, is also included.     

Cube‐in‐Cube Hollow Cu9S5 Nanostructures with Enhanced Photocatalytic Activities in Solar H2 Evolution

Hydrogen produced from water under solar energy is an ideal clean energy source, and the efficiency of hydrogen production usually depends on the catalytic systems based on new compounds and/or a unique nanostructure. Herein, well‐defined cube‐in‐cube hollow Cu₉S₅ nanostructures have been successfully prepared with Cu₂O nanocubes and CS₂ as precursors, and single‐shell hollow Cu₉S₅ nanocubes could be obtained by replacing CS₂ with Na₂S. The formation mechanism of cube‐in‐cube hollow nanostructures has been proposed based on the Kirkendell effect and an outward self‐assembly process. Further studies revealed that the cube‐in‐cube hollow Cu₉S₅ nanostructures exhibited better photocatalytic activity toward solar H₂ evolution and would be a promising photocatalyst in the solar hydrogen industry.     

MnO2‐Modified Persistent Luminescence Nanoparticles for Detection and Imaging of Glutathione in Living Cells and In Vivo

Persistent luminescence nanoparticles (PLNPs) hold great promise for the detection and imaging of biomolecules. Herein, we have demonstrated a novel nanoprobe, based on the manganese dioxide (MnO₂)‐modified PLNPs, that can detect and image glutathione in living cells and in vivo. The persistent luminescence of the PLNPs can be efficiently quenched by the MnO₂ nanosheets. In the presence of glutathione (GSH), MnO₂ was reduced to Mn²⁺ and the luminescence of PLNPs can be restored. The persistent luminescence property can allow detection and imaging without external excitation and avoid the background noise originating from the in situ excitation. This strategy can offer a promising platform for detection and imaging of reactive species in living cells or in vivo.     

Ruthenium‐Catalyzed C7 Amidation of Indoline CH Bonds with Sulfonyl Azides

A ruthenium‐catalyzed direct C7 amidation of indoline C?H bonds with sulfonyl azides was developed. This procedure allows the synthesis of a variety of 7‐amino‐substituted indolines, which are useful in pharmaceutical. The good functional tolerances, as well as the mild conditions, are prominent feature of this method.     

Elements analysis of infant milk formula by ICP-OES: a comparison of pretreatment methods

Sample pretreatments are critical steps for achieving true and precise results in element analysis for infant milk formula. In this study, we made a comparative study of four pretreatment methods: dry ashing (DA), wet ashing (WA), microwave ashing (MA) and slurry dispersion analysis. Nine elements (Ca, Cu, Fe, K, Mg, Mn, Na, P and Zn) were determined by inductively coupled plasma optical emission spectrometry. Infant formula (GBW08509) with certified values was used for assessment of trueness and precision. The data showed that all relative standard deviations (RSD) of the observed values were <15 %. In contrast to other pretreatment, results for MA had the lowest RSD (≤5 %) for all the elements. For Cu and Mn, there was no significant difference between measurement results and certified values in four pretreatments. But, after DA and WA the results for Ca, K, Na, P and Zn differed significantly from the certified values.     

Synthesis,characterization and properties of novel cellulose derivatives containing phosphorus: cellulose diphenyl phosphate and its mixed esters

Using ionic liquid 1-allyl-3-methylimidazolium chloride as reaction medium, a series of novel cellulose esters containing phosphorus including cellulose diphenyl phosphate (C-Dp) and cellulose acetate (CA)–diphenyl phosphate mixed esters was synthesized homogeneously. The degree of substitution was well controlled by altering reaction conditions, such as the molar ratio of the acylating reagents/anhydroglucose unit and reaction time. The structure and thermal properties of cellulose esters were characterized by FTIR, NMR, wide-angle X-ray powder diffraction and differential scanning calorimetry. All the products possessed excellent solubility in some common organic solvents, and transparent films of cellulose esters were obtained by solution casting. In contrast to C-Dp, CA–diphenyl phosphate mixed esters showed clear glass transitions. More interestingly, these cellulose mixed esters exhibited thermoplastic behavior and could be processed by traditional melt processing methods.     

Diversity of potential hydrogen bonds in cellulose I revealed by molecular dynamics simulation

We have performed molecular dynamics calculations using a revised version of the Gromos56A_carbo force field to understand the consequences of the different potential hydrogen bonding patterns on the structural stability and thermal behavior of the I_α and I_β forms of native cellulose. For each allomorph, we considered three patterns of hydrogen bonds: two patterns obtained from neutron diffraction data refinement and a regular mixture of the two. Upon annealing, the hydrogen bonding schemes of cellulose I_β, irrespective of the starting structure, re-arranged into the main hydrogen bond pattern experimentally observed (pattern A). On the other hand, the I_α structures, irrespective of the starting hydrogen bonding pattern, converged to a non-experimental structure where the adjacent chains are shifted along the chain direction by 0.12 nm in the hydrogen-bonded plane, and the hydroxymethyl group conformation alternates between gt and tg along the chain. The exotic structure in I_α might be a consequence of a deficiency in force field parameters and/or potential molecular arrangement in less crystalline cellulose.